Open-Xchange Community Edition Installer released

[Martin Heiland]

Mh, i assumed that this package has a dependency to postfix? Anyway, postfix is at the list of software which should be installed... i'll take a look.

greetings

// edit: has been fixed, thanks for reposting!

[bene]

Does not really work!
I tested your fixed version with admin_gui at 17:00 o´clock .
Here the timestap of the Version that i downloaded:

hyperion-debian_etch.sh	2007-Oct-21 01:02:11	17.5K	application/octet-stream
hyperion-debian_etch.tar.gz	2007-Oct-20 02:31:49	3.7M	application/x-gzip

Here the output during the setup:

openxchange:~# ./hyperion-debian_etch.sh

Downloading required Debian packages)...
Depending on your internet connection, this may take a while.
-------------------------------------------------------------
Hole:1 http://security.debian.org etch/updates Release.gpg [189B]
Hole:2 http://ftp.de.debian.org etch Release.gpg [378B]
OK   http://security.debian.org etch/updates Release
OK   http://ftp.de.debian.org etch Release
Ign http://security.debian.org etch/updates/main Packages/DiffIndex
Ign http://ftp.de.debian.org etch/main Packages/DiffIndex
Ign http://security.debian.org etch/updates/contrib Packages/DiffIndex
Ign http://security.debian.org etch/updates/non-free Packages/DiffIndex
Ign http://ftp.de.debian.org etch/non-free Packages/DiffIndex
Ign http://ftp.de.debian.org etch/main Sources/DiffIndex
Ign http://ftp.de.debian.org etch/non-free Sources/DiffIndex
Ign http://security.debian.org etch/updates/main Sources/DiffIndex
Ign http://security.debian.org etch/updates/contrib Sources/DiffIndex
Ign http://security.debian.org etch/updates/non-free Sources/DiffIndex
OK   http://ftp.de.debian.org etch/main Packages
OK   http://security.debian.org etch/updates/main Packages
OK   http://security.debian.org etch/updates/contrib Packages
OK   http://ftp.de.debian.org etch/non-free Packages
OK   http://security.debian.org etch/updates/non-free Packages
OK   http://security.debian.org etch/updates/main Sources
OK   http://security.debian.org etch/updates/contrib Sources
OK   http://security.debian.org etch/updates/non-free Sources
OK   http://ftp.de.debian.org etch/main Sources
OK   http://ftp.de.debian.org etch/non-free Sources
Es wurden 2B in 0s geholt (2B/s)
Paketlisten werden gelesen... Fertig
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut... Fertig
Einige Pakete konnten nicht installiert werden. Das kann bedeuten, dass
Sie eine unmögliche Situation angefordert haben oder dass, wenn Sie die
Unstable-Distribution verwenden, einige erforderliche Pakete noch nicht
kreiert oder aus Incoming herausbewegt wurden.
Die folgenden Informationen helfen Ihnen vielleicht, die Situation zu lösen:

Die folgenden Pakete haben nichterfüllte Abhängigkeiten:
  postfix-mysql: Hängt ab: postfix soll aber nicht installiert werden
                 Hängt ab: postfix (= 2.3.8-2+b1) soll aber nicht installiert werden
E: Kaputte Pakete
Java has not been installed. Aborting installation.

I installed Debian Etch from scratch. As workaround i installed postfix and then run you installer. Then everything works fine.

Greez BeNe

[Martin Heiland]

what else did you do than apt-get install postfix? I just added "postfix" to the installer, you may check this if you look at the install script.

[bene]

As i said, i use the with admin_gui version and there is no postfix package on the installer
In the version without the admin_gui everthing works fine (there is the postfix package now on it).

Greez BeNe

[Martin Heiland]

Oops, yes you were right, now also fixed at this installer

[bene]

Ok fine!
I will going to Test the Version with admin_gui now...

2007-10-21
 added automatic configuration for munin monitor graphs. Some graphs are still
 missing as the required munin plugins are not configured yet. (debian)
 This only affects the "with_admingui" beta package

Munin will not create any graphs or html file. The Folder munin is completely empty. Maybe the cron or munin-node does not run ?

Why don´t you directly redirect into the /ox/ folder ?
Any reason ? When a customer type in the Servername in the Browser he always must select the ox folder to get in...

Greez BeNe

[Martin Heiland]

Munin will not create any graphs or html file. The Folder munin is completely empty. Maybe the cron or munin-node does not run ?

Graphs are being created after about 5 minutes to /var/cache/munin/
The /var/www/munin directory is a relic of the munin default installation, showing your munin graphs to everybody on the world is not quite useful. I did not delete it because somebody already has munin configured that way and it would destroy his graphs.

Why don´t you directly redirect into the /ox/ folder ?
Any reason ? When a customer type in the Servername in the Browser he always must select the ox folder to get in...

Because the Community Edition is no Out-of-the-Box "product" and some other websites are already existing at the / path.

[bene]

I have it
The Munin graphs are only shown now in the Admin Gui.
I tested it two days ago and all the graphs was in the Munin folder and non in the admin gui. But this is better. Thanks a lot for your work here. This installer was really needed!

Greez BeNe

[hlepesant]

Missing .deb and Apache3 Prefork

Hi,

Very nice work.
The scripts hyperion-debian_etch.XX with_admingui works well on a fresh installed Debian Etch 4.0r1.

I only need to install this .deb :

- iproute : needed for Administration -> Configuration -> network
- clamav, clamav-daemon, spamassassin, amavis-new : needed by /etc/init.d/open-xchange-restart-services

And I've installed apache2-mpm-prefork instead of apache2-mpm-worker to have libapache2-mod-php5, and it's wok well.

Best regards,
Hugues

[Martin Heiland]

Hi,

i'll test and add those modules shortly, thanks for those investigations

Greetings

[hlepesant]

Procmail was missing too

I've installed procmail too.
I think it wasn't insatlled because I run the installer on a fresh [and minimalist] debian ;-)

hug

Hi,

Very nice work.
The scripts hyperion-debian_etch.XX with_admingui works well on a fresh installed Debian Etch 4.0r1.

I only need to install this .deb :

- iproute : needed for Administration -> Configuration -> network
- clamav, clamav-daemon, spamassassin, amavis-new : needed by /etc/init.d/open-xchange-restart-services

And I've installed apache2-mpm-prefork instead of apache2-mpm-worker to have libapache2-mod-php5, and it's wok well.

Best regards,
Hugues

[hsimon]

community Installer update option

Hi,
I just did an update using the community installer for Ubuntu 7.10, latest upload. The problem encountered was the directory /opt/open-xchange/etc/groupware is empty except for the two subdirectories

Regards,
Horst

[Martin Heiland]

The installer should have created a backup of the etc directory before, it's named etc-'timestamp'. The /opt/open-xchange/etc directory only holds 2 subdirectories which hold the real configuration files. I had to change some things at the update process which leads to such problems when updating from a older version of the installer, sorry for that - but i think updating will work much better now in the future.

Greetings

[hlepesant]

OXHyperion & Ubuntu 7.10 experience

Hi all,

After testing the script on Debian Etch, I've try to run the installer for Ubuntu Gutsy.

Sorry for this but I had some problem :

1. jcharset was missing : install failed
2. timsieved not well configured : can't create users

jcharset :
Describe here .
To solve the jcharset I had to :
- download JCharset 1.3
- untar hyperion-ubuntu_gutsy.tar.gz
- copy jcharset.jar in the lib/
- re-tar hyperion-ubuntu_gutsy.tar.gz
- make a local copy of /tmp/open-xchange/build.xml
- edit this copy
- add this lines :

--- hyperion-ubuntu_gutsy.sh.orig 2007-10-29 18:18:45.000000000 +0100
+++ hyperion-ubuntu_gutsy.sh 2007-10-29 17:16:37.000000000 +0100
@@ -139,6 +139,10 @@
cp lib/json.jar /opt/open-xchange/lib/

echo ""
+ echo "Copying good build.xml..."
+ cp /home/hugues/build.xml $SRC_DIR/open-xchange/build.xml
+
+ echo ""
echo "Compiling Open-Xchange Groupware..."

Then the script run well.

timsieved :

A error in /etc/cyrus.conf

sieve           cmd="/usr/lib/cyrus/bin//usr/lib/cyrus/bin//usr/lib/cyrus/bin//usr/lib/cyrus/bin//usr/lib/cyrus/bin//usr/lib/cyrus/bin/timsieved" listen="localhost:sieve" prefork=0 maxchild=100

As you see the path to timsieved is a bit crazy ;-)

So I edit the file, correct the path and restart cyrus-imap.

Now I can create users :-)

Best regards,
Hug,
Still investigate....

[Martin Heiland]

Hi, i fixed that timsieved stuff, it was a non-well formated awk command which produces such stuff when beeing executed several times. The jcharset.jar dependency has been added to the .tar.gz package but i will not fix sourcecode with the installer, this is obviously a cvs problem because the dependency has not been added to build.xml - thats already reported to the R&D Team.

Thanks for testing!

Greetings