Homepage | Products | OX Knowledge Base | Support | Try Now | Contact | Company
OX Logo
Results 1 to 3 of 3
  1. #1
    neowdj Guest

    Default problem with pop3 and ox in ubuntu 10.04

    excuse me for my english but i'm french
    i have install Open Xchange under Ubuntu 10.04 server.

    my problem is:

    Using fallback storage "mailaccount". Error: POP3-2060 Category=8 Message=Missing POP3 storage name for user 10 in context 1. exceptionID=-1377850806-2

    at the login connexion

    with imap no problems


    my mail.properties

    Code:
    # Set the login source for primary mail/transport account; meaning which source is taken to determine a user's
    # login for mailing system. If 'login' is set, then user's individual mail login
    # as defined in user storage is taken. If 'mail' is set, then user's individual
    # primary email address is taken. If 'name' is set, then user's individual system's
    # user name is taken.
    # Currently known values: login, mail, and name
    com.openexchange.mail.loginSource=mail
    
    # Set the password source for primary mail/transport account; meaning which source is taken to determine a user's
    # password to login into mailing system. If 'session' is set, then user's individual
    # system's password is taken. If 'global' is set, then the value specified through
    # property 'com.openexchange.mail.masterPassword' is taken.
    # Currently known values: session and global
    com.openexchange.mail.passwordSource=session
    
    # Set the mail server source for primary mail account; meaning which source is taken to determine the mail
    # server into which the user wants to login to access mails. Set to 'global' to take
    # the value specified through property "com.openexchange.mail.mailServer". Set to
    # 'user' to take user's individual mail server settings as specified in storage.
    # Currently known values: user and global
    com.openexchange.mail.mailServerSource=global
    
    # Set the transport server source for primary transport account; meaning which source is taken to determine the
    # transport server into which the user wants to login to transport mails. Set to
    # 'global' to take the value specified through property "com.openexchange.mail.transportServer".
    # Set to 'user' to take user's individual transport server settings as specified in storage.
    # Currently known values: user and global
    com.openexchange.mail.transportServerSource=global
    
    # The master password for primary mail/transport server. Only takes effect when property
    # "com.openexchange.mail.passwordSource" is set to "global"
    com.openexchange.mail.masterPassword=*******************
    
    # Primary mail server: e.g. 192.168.178.32:8143 or imap://192.168.178.32:7143
    # Only takes effect when property "com.openexchange.mail.mailServerSource" is set to "global"
    com.openexchange.mail.mailServer=**************.com:110
    
    # Primary transport server: e.g. 192.168.178.32:125 or smtp://192.168.178.32:225
    # Only takes effect when property "com.openexchange.mail.transportServerSource" is set to "global"
    com.openexchange.mail.transportServer=************.com:25
    
    # The mail provider fallback if an URL does not contain/define a protocol
    com.openexchange.mail.defaultMailProvider=pop3
    
    # Define the default MIME charset used for character encoding. This setting will then be
    # accessible through system property "mail.mime.charset". This parameter takes
    # effect for the complete mail module where no charset is given.
    mail.mime.charset=UTF-8
    
    # Specify max number of mail connections that can exist at the same time on the server
    # Zero means unlimited.
    com.openexchange.mail.maxNumOfConnections=0
    
    # Define the max. fetch limit; meaning all mails whose count is less than or equal to
    # this value are going to be fetched with all attributes set. Thus these mails can be
    # put into message cache for subsequent list requests.
    com.openexchange.mail.mailFetchLimit=1000
    
    # maximum size of email text attachments that will be displayed inline 
    #( in bytes)
    com.openexchange.mail.attachmentDisplaySizeLimit=8192
    
    # Define the interval seconds of the mail access cache's shrinker thread
    com.openexchange.mail.mailAccessCacheShrinkerSeconds=3
    
    # Define the idle seconds a mail access may reside in mail access cache before it is removed by shrinker thread
    com.openexchange.mail.mailAccessCacheIdleSeconds=7
    
    # Comma-separated hex values of colors for displaying quoted text emails
    com.openexchange.mail.quoteLineColors=#a14044,#917722,#599351,#516193,#666666
    
    # Enable/disable user defined flags
    com.openexchange.mail.userFlagsEnabled=true
    
    # Define the implementing class of PartModifier. This class
    # is then be used to manipulate the email before displaying.
    com.openexchange.mail.partModifierImpl=com.openexchange.mail.partmodifier.DummyPartModifier
    
    # This property defines if the default folders of an user (Draft, Sent, Spam
    # & Trash) are going to be placed right below folder "INBOX" even if
    # feature "altNamespace" is enabled. NOTE: This property requires that
    # subfolders are still permitted below initial folder "INBOX" even though
    # "altNamespace" is enabled.
    com.openexchange.mail.allowNestedDefaultFolderOnAltNamespace=false
    
    # Defines if folder subscription is ignored when listing mail folders
    # If set to 'true', all folders - regardless of their subscription status - are
    # going to be listed
    com.openexchange.mail.ignoreSubscription=false
    
    # Define if underlying store should support subscription
    com.openexchange.mail.supportSubscription=true
    
    # Define the separator within folder fullnames if not available from mail server
    com.openexchange.mail.defaultSeparator=/
    
    # The watcher checks after watcherFrequency for mail connections used for 
    # more than watcherTime milliseconds and logs this mail connection. If
    # watcherShallClose is set to true those connections will be closed.
    com.openexchange.mail.watcherEnabled=true
    
    # Define watcher's frequency in milliseconds
    com.openexchange.mail.watcherFrequency=10000
    
    # Define exceeding time in milliseconds for mail connections. If use time
    # of an mail connection exceeds this value it is logged. Thus unclosed
    # connections can be detected.
    com.openexchange.mail.watcherTime=60000
    
    # Define if watcher is allowed to close exceeded mail connections
    com.openexchange.mail.watcherShallClose=false
    
    # JavaMail Properties
    # Placeholder "/opt/open-xchange/etc/groupware" is automatically replaced.
    com.openexchange.mail.JavaMailProperties=/opt/open-xchange/etc/groupware/javamail.properties
    
    # A comma-separated list of headers which identifies phishing headers; e.g.
    # X-Phishing1,X-Phishing2,etc.
    # Leave empty for no phishing header.
    com.openexchange.mail.phishingHeader=
    
    # Define whether a context admin is allowed to login to mail system or not.
    # Note that a mail account is supposed to exist if set to true; if not an
    # authentication error will occur. 
    com.openexchange.mail.adminMailLoginEnabled=false


    thank you in advance
    Last edited by neowdj; 06-23-2010 at 03:08 PM.

  2. #2
    dhorth Guest

    Default

    I'm having the same problem, IMAP works pop3 does not. I assume it has something to do with my filestore, I'm just not sure how to troubleshoot the problem.

    I keep seeing these errors in my log
    WARNING: Path is null. Error: POP3-2065 Category=8 Message=Missing POP3 storage path for user 4 in context 1. exceptionID=-690107943-1232
    POP3-2065 Category=8 Message=Missing POP3 storage path for user 4 in context 1. exceptionID=-690107943-1232

  3. #3
    Join Date
    Feb 2007
    Location
    Germany
    Posts
    3,695

    Default

    Hi,

    contents of POP3 Accounts are stored to the primary IMAP acocunt ("storage"). Could you please post the whole exception from the OX log file or add it to a bug report? We also experienced this error once but could not reproduce it. What OX version are you using?

    Greetings.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •