Announcement

Collapse
No announcement yet.

problem with pop3 and ox in ubuntu 10.04

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • problem with pop3 and ox in ubuntu 10.04

    excuse me for my english but i'm french
    i have install Open Xchange under Ubuntu 10.04 server.

    my problem is:

    Using fallback storage "mailaccount". Error: POP3-2060 Category=8 Message=Missing POP3 storage name for user 10 in context 1. exceptionID=-1377850806-2

    at the login connexion

    with imap no problems


    my mail.properties

    Code:
    # Set the login source for primary mail/transport account; meaning which source is taken to determine a user's
    # login for mailing system. If 'login' is set, then user's individual mail login
    # as defined in user storage is taken. If 'mail' is set, then user's individual
    # primary email address is taken. If 'name' is set, then user's individual system's
    # user name is taken.
    # Currently known values: login, mail, and name
    com.openexchange.mail.loginSource=mail
    
    # Set the password source for primary mail/transport account; meaning which source is taken to determine a user's
    # password to login into mailing system. If 'session' is set, then user's individual
    # system's password is taken. If 'global' is set, then the value specified through
    # property 'com.openexchange.mail.masterPassword' is taken.
    # Currently known values: session and global
    com.openexchange.mail.passwordSource=session
    
    # Set the mail server source for primary mail account; meaning which source is taken to determine the mail
    # server into which the user wants to login to access mails. Set to 'global' to take
    # the value specified through property "com.openexchange.mail.mailServer". Set to
    # 'user' to take user's individual mail server settings as specified in storage.
    # Currently known values: user and global
    com.openexchange.mail.mailServerSource=global
    
    # Set the transport server source for primary transport account; meaning which source is taken to determine the
    # transport server into which the user wants to login to transport mails. Set to
    # 'global' to take the value specified through property "com.openexchange.mail.transportServer".
    # Set to 'user' to take user's individual transport server settings as specified in storage.
    # Currently known values: user and global
    com.openexchange.mail.transportServerSource=global
    
    # The master password for primary mail/transport server. Only takes effect when property
    # "com.openexchange.mail.passwordSource" is set to "global"
    com.openexchange.mail.masterPassword=*******************
    
    # Primary mail server: e.g. 192.168.178.32:8143 or imap://192.168.178.32:7143
    # Only takes effect when property "com.openexchange.mail.mailServerSource" is set to "global"
    com.openexchange.mail.mailServer=**************.com:110
    
    # Primary transport server: e.g. 192.168.178.32:125 or smtp://192.168.178.32:225
    # Only takes effect when property "com.openexchange.mail.transportServerSource" is set to "global"
    com.openexchange.mail.transportServer=************.com:25
    
    # The mail provider fallback if an URL does not contain/define a protocol
    com.openexchange.mail.defaultMailProvider=pop3
    
    # Define the default MIME charset used for character encoding. This setting will then be
    # accessible through system property "mail.mime.charset". This parameter takes
    # effect for the complete mail module where no charset is given.
    mail.mime.charset=UTF-8
    
    # Specify max number of mail connections that can exist at the same time on the server
    # Zero means unlimited.
    com.openexchange.mail.maxNumOfConnections=0
    
    # Define the max. fetch limit; meaning all mails whose count is less than or equal to
    # this value are going to be fetched with all attributes set. Thus these mails can be
    # put into message cache for subsequent list requests.
    com.openexchange.mail.mailFetchLimit=1000
    
    # maximum size of email text attachments that will be displayed inline 
    #( in bytes)
    com.openexchange.mail.attachmentDisplaySizeLimit=8192
    
    # Define the interval seconds of the mail access cache's shrinker thread
    com.openexchange.mail.mailAccessCacheShrinkerSeconds=3
    
    # Define the idle seconds a mail access may reside in mail access cache before it is removed by shrinker thread
    com.openexchange.mail.mailAccessCacheIdleSeconds=7
    
    # Comma-separated hex values of colors for displaying quoted text emails
    com.openexchange.mail.quoteLineColors=#a14044,#917722,#599351,#516193,#666666
    
    # Enable/disable user defined flags
    com.openexchange.mail.userFlagsEnabled=true
    
    # Define the implementing class of PartModifier. This class
    # is then be used to manipulate the email before displaying.
    com.openexchange.mail.partModifierImpl=com.openexchange.mail.partmodifier.DummyPartModifier
    
    # This property defines if the default folders of an user (Draft, Sent, Spam
    # & Trash) are going to be placed right below folder "INBOX" even if
    # feature "altNamespace" is enabled. NOTE: This property requires that
    # subfolders are still permitted below initial folder "INBOX" even though
    # "altNamespace" is enabled.
    com.openexchange.mail.allowNestedDefaultFolderOnAltNamespace=false
    
    # Defines if folder subscription is ignored when listing mail folders
    # If set to 'true', all folders - regardless of their subscription status - are
    # going to be listed
    com.openexchange.mail.ignoreSubscription=false
    
    # Define if underlying store should support subscription
    com.openexchange.mail.supportSubscription=true
    
    # Define the separator within folder fullnames if not available from mail server
    com.openexchange.mail.defaultSeparator=/
    
    # The watcher checks after watcherFrequency for mail connections used for 
    # more than watcherTime milliseconds and logs this mail connection. If
    # watcherShallClose is set to true those connections will be closed.
    com.openexchange.mail.watcherEnabled=true
    
    # Define watcher's frequency in milliseconds
    com.openexchange.mail.watcherFrequency=10000
    
    # Define exceeding time in milliseconds for mail connections. If use time
    # of an mail connection exceeds this value it is logged. Thus unclosed
    # connections can be detected.
    com.openexchange.mail.watcherTime=60000
    
    # Define if watcher is allowed to close exceeded mail connections
    com.openexchange.mail.watcherShallClose=false
    
    # JavaMail Properties
    # Placeholder "/opt/open-xchange/etc/groupware" is automatically replaced.
    com.openexchange.mail.JavaMailProperties=/opt/open-xchange/etc/groupware/javamail.properties
    
    # A comma-separated list of headers which identifies phishing headers; e.g.
    # X-Phishing1,X-Phishing2,etc.
    # Leave empty for no phishing header.
    com.openexchange.mail.phishingHeader=
    
    # Define whether a context admin is allowed to login to mail system or not.
    # Note that a mail account is supposed to exist if set to true; if not an
    # authentication error will occur. 
    com.openexchange.mail.adminMailLoginEnabled=false


    thank you in advance
    Last edited by Guest; 06-23-2010, 03:08 PM.

  • #2
    I'm having the same problem, IMAP works pop3 does not. I assume it has something to do with my filestore, I'm just not sure how to troubleshoot the problem.

    I keep seeing these errors in my log
    WARNING: Path is null. Error: POP3-2065 Category=8 Message=Missing POP3 storage path for user 4 in context 1. exceptionID=-690107943-1232
    POP3-2065 Category=8 Message=Missing POP3 storage path for user 4 in context 1. exceptionID=-690107943-1232

    Comment


    • #3
      Hi,

      contents of POP3 Accounts are stored to the primary IMAP acocunt ("storage"). Could you please post the whole exception from the OX log file or add it to a bug report? We also experienced this error once but could not reproduce it. What OX version are you using?

      Greetings.

      Comment

      Working...
      X