I've installed OX on Ubuntu 6.10 LTS, everything is working fine except spam filtration. I used martin's installer to get everything going and then I made sure spam & virus filtration is enabled for everyone, I turned on the email scanner too.
When i turned on the scanner it added the necessary entries to my postfix.conf to send things through procmail for filtration. This caused a bunch of errors on send/receive because I didn't have procmail installed. I installed it and everything seems good except I'm receiving a ton of junk. I see all my incoming mails going through the filtration system:
EDIT!
And here is my /etc/postfix/master.cf:
However no filtration information shows up on my headers (scoring etc) and I receiving a ton of viagra adds etc. Are there some setup options that I need to configure to make sure this is working?
Also, it seems like there were a few times where my procmail executable disappeared from my system, I may just be imagining this though.
When i turned on the scanner it added the necessary entries to my postfix.conf to send things through procmail for filtration. This caused a bunch of errors on send/receive because I didn't have procmail installed. I installed it and everything seems good except I'm receiving a ton of junk. I see all my incoming mails going through the filtration system:
Code:
Received: from mail.xxx.com ([unix socket]) by mail.xxx.com (Cyrus v2.2.12-Debian-2.2.12-4ubuntu1) with LMTPA; Mon, 07 Jan 2008 14:43:26 -0800 X-Sieve: CMU Sieve 2.2 Received: by mail.xxx.com (Postfix, from userid 65534) id 65758658280; Mon, 7 Jan 2008 14:43:26 -0800 (PST) Received: from localhost (localhost [127.0.0.1]) by mail.xxx.com (Postfix) with ESMTP id 4463565824F for <myaccount@mail.xxx.com>; Mon, 7 Jan 2008 14:43:26 -0800 (PST) Received: from mail.xxx.com ([127.0.0.1]) by localhost (yyy.xxx.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 29826-05 for <myaccount@mail.xxx.com>; Mon, 7 Jan 2008 14:43:26 -0800 (PST)
And here is my /etc/postfix/master.cf:
Code:
smtp inet n - - - - smtpd -o content_filter=smtp-amavis:[127.0.0.1]:10024 pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - - - - smtp relay unix - - - - - smtp -o fallback_relay= showq unix n - - - - showq error unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} smtps inet n - n - - smtpd -o smtpd_tls_wrappermode=yes -o content_filter=smtp-amavis:[127.0.0.1]:10024 procmail unix - n n - 5 pipe flags=R user=nobody argv=/usr/bin/procmail -t -m /opt/open-xchange/etc/admindaemon/procmailrc ${sender} ${user} ${recipient} smtp-amavis unix - - n - 2 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes -o disable_dns_lookups=yes -o max_use=20 127.0.0.1:10025 inet n - n - - smtpd -o content_filter=procmail:spamcheck -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_delay_reject=no -o smtpd_client_restrictions=permit_mynetworks,reject -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks_style=host -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000 -o smtpd_client_connection_count_limit=0 -o smtpd_client_connection_rate_limit=0 -o receive_override_options=no_header_body_checks,no_unknown_recipient_checks
Also, it seems like there were a few times where my procmail executable disappeared from my system, I may just be imagining this though.
Comment