BUILD FAILED on Debian etch

[Martin Heiland]

Hi,

some questions:
1. is the groupware running?
2. can you telnet to port 8009?
3. is the path for the workers.properties correct?
4. is the path for workers.java_home=/usr/lib/jvm/java-1.5.0-sun correct?
5. is there another process running on port 8009? tomcat MUST NOT run.
6. what do you get when accessing yourserver.tld/servlet/ajax ?

Greetings

how memory.. ?

Thanks Martin, after rebuild the json.jar, BUILD SUCCESSFUL.


But now i have this error :

[Wed Aug 01 16:25:53 2007] [2588:34480] [error] ajp_service::jk_ajp_common.c (1794): Error connecting to tomcat. Tomcat is probably not started or is listening on the wrong port. worker=ajp13_worker failed
[Wed Aug 01 16:25:53 2007] ajp13_worker 192.168.23.23 0.000758

I haven't tomcat installed and this is my ox.conf

--------------------------------------------------------------------------
# Where to find workers.properties. We will create this file later in the tutorial.
#JkWorkersFile /etc/apache2/workers.properties
JkWorkersFile /etc/libapache2-mod-jk/workers.properties
# Where to put jk logs.
JkLogFile /var/log/apache2/mod_jk.log
# Set the jk log level [debug/error/info]
JkLogLevel error
# Select the log format
JkLogStampFormat "[%a %b %d %H:%M:%S %Y] "
# JkRequestLogFormat set the request format
JkRequestLogFormat "%w %V %T"
# This points to our servlets we install later
JkMount /ajax/* ajp13_worker
JkMount /servlet/* ajp13_worker

and workers.properties....

# workers.properties -
#
# This file is a simplified version of the workers.properties supplied
# with the upstream sources. The jni inprocess worker (not build in the
# debian package) section and the ajp12 (deprecated) section are removed.
#
# As a general note, the characters $( and ) are used internally to define
# macros. Do not use them in your own configuration!!!
#
# Whenever you see a set of lines such as:
# x=value
# y=$(x)\something
#
# the final value for y will be value\something
#
# Normaly all you will need to do is un-comment and modify the first three
# properties, i.e. workers.tomcat_home, workers.java_home and ps.
# Most of the configuration is derived from these.
#
# When you are done updating workers.tomcat_home, workers.java_home and ps
# you should have 3 workers configured:
#
# - An ajp13 worker that connects to localhost:8009
# - A load balancer worker
#
#

# OPTIONS ( very important for jni mode )

#
# workers.tomcat_home should point to the location where you
# installed tomcat. This is where you have your conf, webapps and lib
# directories.
#
#workers.tomcat_home=/usr/share/tomcat4

#
# workers.java_home should point to your Java installation. Normally
# you should have a bin and lib directories beneath it.
#
#workers.java_home=/usr/lib/j2sdk1.4-sun
workers.java_home=/usr/lib/jvm/java-1.5.0-sun

#
# You should configure your environment slash... ps=\ on NT and / on UNIX
# and maybe something different elsewhere.
#
ps=/

#
#------ ADVANCED MODE ------------------------------------------------
#---------------------------------------------------------------------
#

#
#------ worker list ------------------------------------------
#---------------------------------------------------------------------
#
#
# The workers that your plugins should create and work with
#
worker.list=ajp13_worker

#
#------ ajp13_worker WORKER DEFINITION ------------------------------
#---------------------------------------------------------------------
#

#
# Defining a worker named ajp13_worker and of type ajp13
# Note that the name and the type do not have to match.
#
worker.ajp13_worker.port=8009
worker.ajp13_worker.host=localhost
worker.ajp13_worker.type=ajp13
#
# Specifies the load balance factor when used with
# a load balancing worker.
# Note:
# ----> lbfactor must be > 0
# ----> Low lbfactor means less work done by the worker.
worker.ajp13_worker.lbfactor=1

#
# Specify the size of the open connection cache.
#worker.ajp13_worker.cachesize

#
#------ DEFAULT LOAD BALANCER WORKER DEFINITION ----------------------
#---------------------------------------------------------------------
#

#
# The loadbalancer (type lb) workers perform wighted round-robin
# load balancing with sticky sessions.
# Note:
# ----> If a worker dies, the load balancer will check its state
# once in a while. Until then all work is redirected to peer
# workers.
worker.loadbalancer.type=lb
worker.loadbalancer.balanced_workers=ajp13_worker

[Martin Heiland]

Hi,

when did you build the json.jar? AFAIK there were some changes at the json writer at the server side.

..list

If it can help you.. this is my lib dir :

activation.jar
commons-cli-1.0.jar
commons-codec-1.3.jar
commons-fileupload.jar
commons-httpclient-2.0.2.jar
commons-logging.jar
concurrent.jar
jakarta-slide-webdavlib-2.1.jar
jcs-1.2.7.9.2.jar
jdom.jar
json.jar
jtnef-1_3_1.zip
junit-4.1.jar
junit-4.5-SNAPSHOT-20070720-1711.jar
mail.jar
mysql-connector-java-3.1.13-bin.jar
org.eclipse.osgi_3.2.2.ox.jar
saxon8-ant.jar
saxon8-dom4j.jar
saxon8-dom.jar
saxon8.jar
saxon8-jdom.jar
saxon8-sql.jar
saxon8-xom.jar
saxon8-xpath.jar
saxon8-xqj.jar
servlet-api-2.4.jar
spring-beans_1.2.7.jar
spring-core_1.2.7.jar
tnef.jar

Thanks Martin

Thanks Martin something is moving, i forget gnu gettext .

Now i have another error. I copy all libs from another runnig installation of OX but this seems like another post i red in this forum and it says that is a jar problem:

-------------------------------------------------------------------------------------------------------
Buildfile: build.xml

prepare:
[mkdir] Created dir: /opt/open-xchange/src/open-xchange/build
[mkdir] Created dir: /opt/open-xchange/src/open-xchange/tmp

patchVersionJava:
[copy] Copying 1 file to /opt/open-xchange/src/open-xchange/src/com/openexchange/server

compile:
[javac] Compiling 1049 source files to /opt/open-xchange/src/open-xchange/build
[javac] /opt/open-xchange/src/open-xchange/src/com/openexchange/ajax/container/Response.java:406: cannot find symbol
[javac] symbol : method entrySet()
[javac] location: class org.json.JSONObject
[javac] final Set<Map.Entry<String, Object>> entrySet = response.getJSON().entrySet();
[javac] ^
[javac] Note: Some input files use or override a deprecated API.
[javac] Note: Recompile with -Xlint:deprecation for details.
[javac] Note: Some input files use unchecked or unsafe operations.
[javac] Note: Recompile with -Xlint:unchecked for details.
[javac] 1 error

BUILD FAILED
/opt/open-xchange/src/open-xchange/build.xml:114: Compile failed; see the compiler error output for details.

Total time: 35 seconds
Buildfile: build.xml

[Martin Heiland]

Hi,

please install the gnu gettext package for debian

Greetings.

Hi,
i have all lib that are listed in wiki, but i have an error during compile after cvs step. I'm using update.sh script but i try only "ant -Dlib.dir=/opt/open-xchange/lib install" command and it fail again. These are 2 errors from ox_build.log :

BUILD FAILED
/opt/open-xchange/src/open-xchange-gui/buildi.xml:484: The following error occurred while executing this line:
/opt/open-xchange/src/open-xchange-gui/buildi.xml:431: Execute failede : java.io.IOException: java.io.IOException: msgcat: not found

Do someone know these errors?

Sorry for my english.

Thanks

Simone